AntMiner L3+ @ 504 MH/s With Power Supply



• Scrypt Mining Hash Rate: 504MH/s (±7% is expected)
• Power Consumption: 800W (±10%) at the wall (with Bitmain’s APW3 PSU, 93 percent efficiency, 25C ambient temp)
• Power Efficiency: 1.6 J/MH at the wall (with Bitmain’s APW3 PSU)
•• Rated Voltage: 11.60 ~13.00V
• Operating Temperature: 0C to 40C
• Network Connection: Ethernet (cable not included)

Please contact us first if you need to buy in bulk to confirm our stock.


• Each AntMiner L3+ requires NINE 6-pin PCI-e connectors for 12V DC input (must be very stable power supply) There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All NINE 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
• Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
• Power supply unit is included.





      Home | Shop | Terms | Tutorials | Contact


  Copyright ©2019 Bitcoin Miner Shop. All rights reserved.  


Feature Products

  A9 ZMaster 50k Sol/s
  Antminer Z9 Mini 10kH/s


    Essential SSL